Rust Remover Professional Acid-Based Iron & Corrosion Cleaner

Professional-Grade Rust Removal for Marine Surfaces

Xanigo Marine Rust Remover is an acid-based cleaning solution engineered to dissolve iron oxide (rust) and mineral corrosion quickly and effectively. Designed for marine and industrial applications, it penetrates oxidation layers to break down rust at the source, reducing the need for aggressive scrubbing.

Whether youre restoring gel coat, preparing a surface for compounding, or removing iron staining from metal components, this fast-acting formula delivers controlled, professional results.

Why It Works

Rapid rust dissolution
Penetrates porous corrosion layers
Effective at room temperature
Controlled foaming for vertical surfaces
Minimal residue when properly rinsed

Ideal For

Rust and corrosion removal
Iron oxide staining elimination
Surface preparation before polishing or compounding
Marine, automotive, industrial, and maintenance applications

Compatible Surfaces

Bare steel and iron
Carbon steel
Ferrous metal components
Gel coat
Paint

Not Recommended For

Prolonged exposure to aluminum or stainless steel
Anodized metals
Natural stone (marble, limestone, travertine)
Decorative or soft metal finishes

Always test in an inconspicuous area prior to full application.

Directions for Use

1. Apply directly to the affected surface using a spray, brush, or sponge.

2. Allow product to dwell for several minutes.

3. Agitate if necessary to accelerate rust removal.

4. Rinse thoroughly with clean water.

5. Repeat for heavy corrosion if required.

6. Wash surface with an all-purpose cleaner like our Waterless Wash, after use, to neutralize.

Do not allow product to dry on the surface.

For long-term protection, follow with Xanigo Marine Corrosion Inhibitor.